刻度移液管

BRAND的玻璃材质刻度移液管可以用于转移溶液、配置样品等多种应用。

清除全部
购物选项
精确度等级
分刻度
误差极限(毫米)
类型
标称量程
设置降序方向
视图 %1及以上 列表

10 项目

设置降序方向

DIN EN ISO 835

在最新的DIN EN ISO 835中,刻度移液管的等待时间从15秒减少到5秒,标称量程在顶部,完全排出的2类移液管也包含在内。我们推荐2类移液管,全部体积或者部分体积都为完全排出,因为只需设置一次凹液面。相对地,1类与 3类移液管,由于需要设置两次凹液面可能会导致过量排液。如果发生这种情况,样品可能需要重新准备。 所有BLAUBRAND® 刻度移液管都随原厂包装提供批号以及批次认证证书。根据要求,也可提供个体检验证书、USP个体检验证书或DAkkS校准证书。(关于批次证书、个体检验证书或DAkkS校准证书的信息请参见 129页与208页。)

精确的移液管排液头

优化排液头内的液流形态确保胖肚移液管与刻度移液管的稳定排液。排液头的机械强度以及烧圆的边缘确保较长的使用寿 命。

精准移液器吸头

吸头具有最优化的流动几何形状,确保球型和刻度移液器中的液体能够顺畅地流出。吸头具有强大的机械承受强度,经过火法抛光的边缘能够延长使用寿命。

常见问题 (刻度移液管)

What is the difference between class A and AS graduated pipettes?

Class A and AS refer always to highest quality grade in accord to the respective standards and 'S' stands for swift delivery only used for volumetric instruments calibrated to deliver, pipettes and burettes (TD, Ex). For volumetric instruments calibrated to contain (TC, In) a swift delivery is not necessary and therefore not defined in the respective standards.

Which kind of inscription is the best?

It depends on the application: If you have to use aggressive cleaning conditions (aggressive scrubbing for example) pipettes with amber diffusion stain will be appropriate. Pipettes with blue enamel provide high contrast and are usually appropriate for most applications.

There is a small amount of residual liquid in the tip. Should it be blown out or not?

No. The small amount of residual liquid must not be blown out as it is already taken into account during calibration of the bulb or graduated pipettes.

How can the meniscus be read easily?

The volume of a concave meniscus has to be read at the lowest point of the liquid level. Here the lowest point of the meniscus has to touch the upper edge of the graduation mark. For parallax-free adjustment of the meniscus, the burette is held upright and the observer's eye must be at the same height as the meniscus. In this position the ring mark will appear as a line. The meniscus will appear darker and more easily readable in front of a light background if a piece of dark paper is held behind the instrument immediately beneath the ring or graduation mark.

What are BLAUBRAND® and SILBERBRAND graduated pipettes labeled with?

Every BLAUBRAND® and SILBERBRAND bulb or graduated pipette is labeled with the nominal capacity, unit symbol (ml), error limit (± ml), calibration temperature (20 °C), calibration type (Ex), Class (AS or B), country of origin (Germany), color code, manufacturer's trademark (BLAUBRAND or SILBERBRAND) or companies name or logo (BRAND), as well as with standard referring to (ISO 648 or 835) and inscription ETERNA (if applicable). Every BLAUBRAND® pipette is labeled with the following additional information; DE-M marking for all pipettes, waiting time in combination with calibration type in the format (Ex + 5 s), batch or serial number, and in case of USP pipettes the inscription USP.

Can you explain the waiting time for graduated pipettes?

The waiting time begins when the meniscus comes to rest at the lower volume mark or in the tip: During the waiting time residual liquid continues to flow down from the glass wall. You only have to consider the waiting time of 5 s for BLAUBRAND® pipettes (cl. AS) before you remove the tip from the inner surface of the vessel. For SILBERBRAND pipettes (cl. B) no waiting is prescribed.

How do the three types of graduated pipettes differ in handling?

Due to the different scale graduated pipettes differ in handling as follows: Type 1: Set the meniscus at zero point and discharge the liquid to lower volume. Type 2: Set the meniscus for the volume intended to deliver and discharge the liquid completely. Type 3: Set the meniscus at zero point and discharge the liquid partially to one lower volume mark or completely.

What is the difference between the three types of graduated pipettes?

Graduated pipettes contain a scale that differs as follow: Type 1: Nominal capacity above the tip and the zero point at top. Type 2: Nominal capacity at the top. Type 3: Zero point at top.

What pipette controllers can be used?

BRAND offers three different pipette controllers: macro pipette controller (easy manual handling) accu-jet pro (motorized controller) classic pipette fillers (three different versions)

© 2024 BRAND GMBH + CO KG