瓶口滴定器

使用 BRAND 瓶口式滴定管让实验室的工作更有效率。欢迎关注适合您滴定应用的 Titrette® 数字滴定管。

清除全部
购物选项
型号
标称量程
设置降序方向
  1. 瓶口式滴定器 Titrette®
    瓶口式滴定器 Titrette®

    从… RMB13,216.00

视图 %1及以上 列表

2 项目

设置降序方向

Titrette®数字瓶口滴定器

新一代数字滴定器. 操作简单、逐滴滴定,紧凑、高精度设 计,可更换的活塞头/活塞腔及选配的计算 机接口 — 作为 Digital Burette 的继承者, 这些仅是其中的一部分特点. 借助 Titrette ® 瓶口滴定器,您可以以最高精度(实现 1/4 滴的精准度)进行快速、可靠地滴定操作, 无需连接电源 — 可在实验室、实际生产场 所或室外使用

使用及操作

手动旋钮: 操作流畅,易掌控的手动旋钮可保证灵敏而且准确的控制每一滴滴液。 A级精准度 : Titrette® 瓶口滴定器拥有全新的滴定检测系统 - 误差范围达DIN EN ISO 385,A级玻璃滴定管的标准。流畅操作: 当切换滴定和吸液操作时,无需按钮切换。通过转动手动旋钮的方向,滴定器将进行自动检测是补液还是滴定。旋钮的齿轮齿数比经过优化,保证补液的快速,与缓慢、灵敏的逐滴滴定。重量轻,结构紧凑:滴定器重量轻,结构紧凑,保 证极佳的稳定性。滴定管水平和垂直方向调,增加设备放置的 灵活性,比如,在使用磁力搅 拌子或使用不同规格试剂瓶的 情况下。用户自助: 设备可在数分钟内快速、简单 地拆卸 — 清洗、更换活塞/活 塞腔,或更换电池。您可在实 验室内方便简单地完成维护操 作,维护之后,可于数分钟内 重新投入使用。避光防护: 为了保护光敏感试剂,透明的 观察窗可替换为棕色观察窗 (附赠)。

实用特点

滴定器另备有4种电子功能: Easy Calibration 简易校准技术. 校准计划. 自动关机节约能源. 更改小数点位数设定. 计算机接口 (选配): 滴定器有可选的RS232计算机接口的型号。与标准配置相比,拥有以下优点:连按两下清零键,滴定结果可自动传输到电脑中,从而减少记录原始数据时发生错误的几率,并遵循了 “GLP” 规范的要求。 每次数据传输,滴定器会自动输送滴定体积、设备序列号、标称量程、校准体积、以及预设的下次校准日期。这样,所有原始数据被收集传入电脑,并被识别为键盘输入的数据。这种数据传输格式应用广泛,保证滴定器与任何支持键盘输入的计算机都相兼容。 可通过标准的USB/RS 232转接口将设备与USB接口连接。

常见问题 (瓶口滴定器)

Is there a special version of the Titrette® ?

Yes, there is a special version of the Titrette® which is optimized for the use with iodine solution (catalog number 998119). The Titrette® SH (catalog number 4760451) shows the dispensed volume in degree Soxhlet-Henkel and is therefore ideal for the determination of the acidity of milk.

I have reached equivalence point during titration. At the tip of the titrating tube one more drop can be seen. Does this drop at the tube tip still count to the displayed volume?

Yes, the drop at the tip of the titrating tube is part of the volume displayed by the Titrette. The drop size for the 10 ml instrument is approx. 20 μl and for the 25 ml and 50 ml instrument approx. 30 μl. Close to the equivalence point the standard solution should be added slowly dropwise, depending on the titration method.

Is it possible to retrofit the computer interface of the Titrette® ?

From a technical point of view this is in principle possible. However, since the electronics and housing parts must be replaced, this is not economical. Therefore the decision for a Titrette® with a computer interface should be made before purchasing the instrument.

What position should the piston have after using the Titrette®?

To reduce cristal deposits always fill the instrument completely up to the upper position after titration.

© 2024 BRAND GMBH + CO KG